10
Specifications
33
% Saturation
Mode
Range
Resolution
Relative accuracy
Range
Resolution
Relative accuracy
Range
Resolution
Relative accuracy
Range
Resolution
Method
Range
Resolution
Method
0.00 - 200.0 %
0.1 %
± 1.5% of Full Scale
mg/L (ppm)
Concentration
Mode
0.00 - 20.00mg/L or ppm
0.01mg/L; 0.01 ppm
± 1.5% of Full Scale
Temperature
-5.0 - 105.0 °C (meter only)*
0.1 °C
± 0.5 °C
Salinity
Correction
0.0 - 50.0 ppt
0.1 ppt
Automatic correction after manual input
Barometric Pressure
Correction (mm Hg)
500 to 1499mm Hg or 66.6 to 199.9 kPA
1mm Hg or 0.1 kPA
Automatic correction after manual input
Automatic Temperature Compensation 0.0 to 50.0°C
Manual Temperature Compensation
Probe (DO / Temp)
Probe Diameter
0.0 to 50.0°C
Galvanic / Thermistor
Body 12mm, Cap 16mm
Response Time 60 seconds to achieve 95% of the reading
% Saturation Calibration Points
100% in saturated air or air-saturated water.
0% in zero oxygen solution
% Saturation Calibration Limits
Factory calibrated absolute value of 10.0% and
below for 0% point & 50% to 200% for 100% point.
Concentration Calibration Window
+/- 40% from the factory default measurement value.
Minimum reading allowed is 2.00mg/L (ppm).
Temperature Calibration Window +/- 5°C from factory default measurement
Offset Adjustments (% Saturation) +/- 10.0 of reading in Saturation mode
HOLD function
Auto-Off function
Yes
Selectable Auto Off function. (20 minutes after last press)
Display Custom Single 4 Digit LCD
*Probe measures 0.0 - 50.0 °C
Inputs BNC for DO & 2.5mm Phono for temperature
Operating Range
Power Requirements
Battery Life
Dimensions
0 to 50 °C
4 AAA-sized batteries (included)
> 700 hours (Alkaline Batteries)
Meter: 15.7 x 8.5 x 4.2 cm / 255 g
Probe: 115mm x 12mm (Dia), 3-ft cable
Membrane housing: 16mm (Dia)
To Next Page
Loading...
