Palm Tungsten T3 Handbook

Chapter 16 Using Palm™ VersaMail™ Personal E-mail Software
188
Alternately, on the New Message screen, tap To and enter the address on the
Recipient List screen, and then tap Done. Use the shortcut buttons at the bottom
of the screen for quick address entry.
For multiple recipients, type a semicolon (;) or tap the semicolon button at the
bottom of the screen, and then type a space between recipient names.
NOTE
If you enter a comma instead of a semicolon, it is automatically changed
to a semicolon. If you enter a space with no punctuation between names,
semicolons are not inserted, and the e-mail message is improperly addressed.
If you want to edit an e-mail address that is longer than the line provided on the
New Message screen, tap the To field and edit the address.
2. To send copies, tap cc: or bcc: and then enter the recipient’s address.
Copies (cc:) allow recipients to see the addresses of the other recipients;
addresses in the blind copies (bcc:) field are hidden from all other recipients.
TIP
To automatically fill in the address as you type, see “Using Smart
Addressing to address a message” later in this chapter.
Addressing a message using Contacts
You can enter a recipient’s address by using the Lookup screen to select the
address. The names and addresses on the Lookup screen come from Contacts.
To use an address from Contacts:
1. On the New Message screen, tap the word To.
2. On the Recipient List screen, tap Lookup.

Palm Tungsten T3 Specifications

General

Brand	Palm
Model	Tungsten T3
Category	Handhelds
Language	English