Panametrics XMO2 - CE Mark Requirements; Grounding the XMO2 Enclosure

2.3.2 CE Mark requirements
CAUTION!
To meet CE Mark requirements, all electrical
cables must be grounded and shielded as
described in Appendix E.
2.3.3 Grounding the XMO2 enclosure
WARNING!
The XMO2 transmitter enclosure must be
properly grounded.
Connect the external ground screw on the XMO2 enclosure
(see Figure 6 below) to a suitable earth ground.
Figure 6: XMO2 Ground screw locations
8