Panasonic AG-CPD20P - Menu Copy and File Transfer Errors; Export and Storage Errors

114
115
No. Message Measure
E22426
Menu copy failed. For copying to a USB memory device, connect a write-enabled USB
memory device. For copying to a recorder, connect a USB memory device
that contains data.
E22427
Source information file cannot be
loaded.
There is no source le or the content of the le is incorrect.
E22428
Shift information file cannot be
loaded.
There is no shift le or the content of the le is incorrect.
E22429
Area information file cannot be
loaded.
There is no area le or the content of the le is incorrect.
E22432
Service log copy failed.
Copying service log is failed. Connect a writable USB memory device and
try copying again.
E22448
Operation was canceled to start
streaming.
Streaming starts, and the operation is canceled. Wait until streaming ends.
E25410
GPS communication error.
Please check the GPS module.
An error occurred in the GPS module.
Consult your supplier.
E27201
Storage capacity was not enough to
transfer the file.
Capacity of the server is not enough for uploading data, and uploading is
canceled.
E27202
File transfer was completed.
Restore file remained.
Upload was completed, but video les not restored remain on the SDHC
Memory card.
E27203
File not found in SDHC cards. No le for uploading is found on an SDHC Memory card.
E27401
Write Protect cards found .
Couldn’t start file transfer.
A read-only SDHC Memory Card is found, and uploading cannot be started.
E27403
Media error.
File transfer was incomplete.
A read/write error was detected with the media. Replace the SDHC Memory
Card with another one.
E27405
Storage write error.
File transfer was incomplete.
A verication error has occurred in the server storage, and uploading cannot
be completed.
E27407
No SDHC Cards found.
Couldn’t start file transfer.
No SDHC Memory card is inserted, and uploading cannot be started.
E27430
Couldn’t start file transfer. Upload cannot be started. Check the network connection.
E27431
File transfer was incomplete. Upload cannot be completed because of network trouble.
E27499
System error.
File transfer was incomplete.
A system error has occurred, and uploading cannot be completed.
E28201
USB storage capacity was not
enough to export.
Use other USB memory device that is not full.
E28202
Export was completed.
Restore file remained.
Restore the le not yet restored, and export it again.
E28203
File not found in SDHC cards. There are no les to export. No export operation needed.
E28400 No USB storage devices found.
Couldn’t start export.
Connect a USB memory device.
E28401
Write Protect cards found.
Couldn’t start export.
Set the SDHC Memory Card write-protect switch away from the write-
protect position.
E28402
All USB storages are read only.
Couldn’t start export.
Connect a write-enabled USB memory device.
E28403
Media error.
Export was incomplete.
Replace the SDHC Memory Card or the USB memory device.
E28404
USB storage file system error.
Couldn’t start export.
Replace the USB memory device.
E28405
USB storage write error.
Export was incomplete.
E28406
Found update file in USB storage.
Couldn’t start export.
Delete the update le on the USB memory device.
E28407
No SDHC Cards found.
Couldn’t start export.
Insert an SDHC Memory Card with recorded les.
E28409
Couldn’t start export. Replace the SDHC Memory Card with another one.
E28499
System error.
Export was incomplete.
Reboot the recorder.
E28880
USB storage was ejected.
Export was incomplete.
Do not remove the USB memory device while exporting data. Reconnect the
USB memory device and export again.
Error Message
(continued)