Panasonic AK-HC3900G - Page 53

– 53 –
Chapter 4 Menu Operations — Menu list
[KNEE]
Item Description of settings
[KNEE] —
Enables/disables the knee function.
This cannot be set in HDR mode.
[OFF], [ON]
 Factory setting: [ON]
[KNEE MASTER POINT]
Sets the knee point position.
[080.00%]…[110.00%] (0.25% step)
 Factory setting: [95.00%]
[KNEE MASTER
SLOPE]
Sets the knee slope.
[00]…[199]
 Factory setting: [130]
[WHITE CLIP]
Item Description of settings
[WHITE CLIP]
Enables/disables the white clip function.
This cannot be set in HDR mode.
[OFF], [ON]
 Factory setting: [ON]
[MASTER WHITE CLIP LEVEL]
Sets the white clip level.
[80%]…[109%]
 Factory setting: [109%]
[HI-COLOR]
Sets whether to improve the color reproduction in high-luminance areas.
[OFF], [ON]
 Factory setting: [OFF]
[DRS]
Item Description of settings
[DRS]
Enables/disables the dynamic range stretcher function. Set this to [ON] to automatically adjust the
contrast.
This cannot be set in HDR mode.
[OFF], [ON]
In the UHD mode, [---] is displayed.
 Factory setting: [OFF]
[EFFECT DEPTH]
Sets the compression level of the high-luminance areas of the dynamic range stretcher function. Set a
larger value to increase the compression level of the high-luminance areas.
[1]…[5]
In the UHD mode, [---] is displayed.
 Factory setting: [5]
[DETAIL SETTING]
[DETAIL SETTING] effects are enabled only for CCU output.
Item Description of settings
[DETAIL]
Enables/disables all detail functions.
[OFF], [ON]
 Factory setting: [ON]
[MASTER DETAIL]
Sets the master detail.
[31]…[31]
 Factory setting: [0]
[H DETAIL LEVEL]
Sets the correction level of the horizontal detail.
[0]…[63]
 Factory setting: [0]
[V DETAIL LEVEL]
Sets the correction level of the vertical detail.
[0]…[63]
 Factory setting: [0]
[PEAK FREQUENCY]
Sets the peak frequency of the horizontal detail.
[0]…[29]
 Factory setting: [0]
[V DETAIL FREQUENCY]
Sets the vertical detail frequency.
[0]…[31]
 Factory setting: [0]
[CRISP]
Sets the detail signal noise removal level.
[00]…[63]
 Factory setting: [5] (UHD mode), [0] (HD mode)
[DETAIL GAIN()]
Sets the detail level in the  (upward) direction.
[31]…[31]
 Factory setting: [0]
[DETAIL GAIN()]
Sets the detail level in the  (downward) direction.
[31]…[31]
 Factory setting: [0]