Panasonic AK-HC3900G - Page 54

– 54 –
Chapter 4 Menu Operations — Menu list
Item Description of settings
[KNEE APERTURE LEVEL]
Adjusts the knee aperture level.
This cannot be set in HDR mode.
[00]…[5]
 Factory setting: [0]
[DETAIL KNEE]
Adjusts the detail components of knee.
This cannot be set in HDR mode.
[00]…[15]
 Factory setting: [0]
[LEVEL DEPENDENT SWITCH]
Enables/disables the function to remove details of dark areas.
This cannot be set in HDR mode.
[OFF], [ON]
 Factory setting: [OFF]
[LEVEL DEPENDENT]
Sets the level to remove details of dark areas.
[00]…[15]
 Factory setting: [8]
[DOWNCON SETTING]
Set the details for down-converted signals.
This is available only when the 4K OPTION board is tted and when in the UHD mode.
[DOWNCON SETTING] effects are enabled only for CCU output.
Item Description of settings
[CHROMA] [CHROMA LEVEL
SWITCH]
Enables/disables the gain adjustment of chroma.
[OFF], [ON]
 Factory setting: [OFF]
[CHROMA LEVEL]
Sets the gain adjustment of chroma.
[100%]…[40%]
 Factory setting: [0%]
[DETAIL SETTING] [DETAIL]
Enables/disables all detail functions.
[OFF], [ON]
 Factory setting: [ON]
[MASTER DETAIL]
Sets the master detail.
[31]…[31]
 Factory setting: [0]
[H DETAIL LEVEL]
Sets the correction level of the horizontal detail.
[0]…[63]
 Factory setting: [0]
[V DETAIL LEVEL]
Sets the correction level of the vertical detail.
[0]…[63]
 Factory setting: [0]
[PEAK FREQUENCY]
Sets the peak frequency of the horizontal detail.
[0]…[29]
 Factory setting: [0]
[V DETAIL
FREQUENCY]
Sets the vertical detail frequency.
[0]…[31]
 Factory setting: [0]
[CRISP]
Sets the detail signal noise removal level.
[00]…[63]
 Factory setting: [10]
[DETAIL GAIN()]
Sets the detail level in the  (upward) direction.
[31]…[31]
 Factory setting: [0]
[DETAIL GAIN()]
Sets the detail level in the  (downward) direction.
[31]…[31]
 Factory setting: [0]
[KNEE APERTURE
LEVEL]
Adjusts the knee aperture level.
This cannot be set in HDR mode.
[00]…[5]
 Factory setting: [0]
[DETAIL KNEE]
Adjusts the detail components of knee.
This cannot be set in HDR mode.
[00]…[15]
 Factory setting: [0]
[LEVEL DEPENDENT
SWITCH]
Enables/disables the function to remove details of dark areas.
This cannot be set in HDR mode.
[OFF], [ON]
 Factory setting: [OFF]
[LEVEL DEPENDENT]
Sets the level to remove details of dark areas.
[00]…[15]
 Factory setting: [8]
[SKIN TONE DETAIL
SETTING]
[SKIN TONE DETAIL]
Enables/disables the skin tone detail function.
[OFF], [ON]
 Factory setting: [OFF]