Panasonic AK-HC3900G - Page 56

– 56 –
Chapter 4 Menu Operations — Menu list
Item Description of settings
[I CENTER]
Sets the center position on the I axis (the area where the skin tone effect is applied).
[0]…[255]
 Factory setting: [140] (UHD mode), [33] (HD mode)
[I WIDTH]
Sets the width of the area where the skin tone effect is applied on the I axis with [I CENTER] being the
center.
[0]…[255]
 Factory setting: [20] (UHD mode), [8] (HD mode)
[Q WIDTH]
Sets the width of the area where the skin tone effect is applied on the Q axis with [I CENTER] being the
center.
[0]…[255]
 Factory setting: [43] (UHD mode), [28] (HD mode)
[Q PHASE]
Sets the phase of the area where the skin tone effect is applied with the Q axis being the reference.
[0]…[359]
 Factory setting: [99] (UHD mode), [82] (HD mode)
[LINEAR MATRIX]
Item Description of settings
[MATRIX]
Enables/disables the matrix function.
[OFF], [ON]
 Factory setting: [OFF]
[LINEAR MATRIX]
— Enables/disables the linear matrix function.
[OFF], [ON]
 Factory setting: [OFF]
[LINEAR TABLE]
Selects the table for linear matrix.
[A], [B]
 Factory setting: [A]
[COLOR CORRECT]
— Enables/disables the 12-axis color correction function.
[OFF], [ON]
 Factory setting: [OFF]
[COLOR CORRECT
TABLE]
Selects the table for color correction.
[A], [B]
 Factory setting: [A]
[MATRIX R-G]
Adjusts the linear matrix between red and green.
This item is not available when [LINEAR MATRIX] is set to [OFF].
[31]…[31]
 Factory setting: [0]
[MATRIX R-B]
Adjusts the linear matrix between red and blue.
This item is not available when [LINEAR MATRIX] is set to [OFF].
[31]…[31]
 Factory setting: [0]
[MATRIX G-R]
Adjusts the linear matrix between green and red.
This item is not available when [LINEAR MATRIX] is set to [OFF].
[31]…[31]
 Factory setting: [0]
[MATRIX G-B]
Adjusts the linear matrix between green and blue.
This item is not available when [LINEAR MATRIX] is set to [OFF].
[31]…[31]
 Factory setting: [0]
[MATRIX B-R]
Adjusts the linear matrix between blue and red.
This item is not available when [LINEAR MATRIX] is set to [OFF].
[31]…[31]
 Factory setting: [0]
[MATRIX B-G]
Adjusts the linear matrix between blue and green.
This item is not available when [LINEAR MATRIX] is set to [OFF].
[31]…[31]
 Factory setting: [0]
[COLOR CORRECTION]
Item Description of settings
[MATRIX]
Enables/disables the matrix function.
[OFF], [ON]
 Factory setting: [OFF]
[LINEAR MATRIX]
— Enables/disables the linear matrix function.
[OFF], [ON]
 Factory setting: [OFF]
[LINEAR TABLE]
Selects the table for linear matrix.
[A], [B]
 Factory setting: [A]
[COLOR CORRECT]
— Enables/disables the 12-axis color correction function.
[OFF], [ON]
 Factory setting: [OFF]