– 58 –
Chapter 4 Menu Operations — Menu list
Item Description of settings
[CY PHASE]
Adjusts the hue of cyan.
This item is not available when [COLOR CORRECT] is set to [OFF].
[127]…[127]
Factory setting: [0]
[CY_G PHASE]
Adjusts the hue between cyan and green.
This item is not available when [COLOR CORRECT] is set to [OFF].
[127]…[127]
Factory setting: [0]
[G PHASE]
Adjusts the hue of green.
This item is not available when [COLOR CORRECT] is set to [OFF].
[127]…[127]
Factory setting: [0]
[G_YL PHASE]
Adjusts the hue between green and yellow.
This item is not available when [COLOR CORRECT] is set to [OFF].
[127]…[127]
Factory setting: [0]
[YL PHASE]
Adjusts the hue of yellow.
This item is not available when [COLOR CORRECT] is set to [OFF].
[127]…[127]
Factory setting: [0]
[YL_R PHASE]
Adjusts the hue between yellow and red.
This item is not available when [COLOR CORRECT] is set to [OFF].
[127]…[127]
Factory setting: [0]
[SKIN CORRECTION]
Item Description of settings
[SKIN AREA SW]
Enables/disables the function to nely adjust the color of the skin tone area.
[OFF], [ON]
Factory setting: [OFF]
[SKIN AREA TABLE]
Selects the table for the skin tone area.
[A], [B]
Factory setting: [A]
[SKIN AREA HUE]
Finely adjusts the hue of the skin tone area.
[127]…[127]
Factory setting: [0]
[SKIN AREA TONE]
Finely adjusts the tone of the skin tone area.
[63]…[63]
Factory setting: [0]
[DNR]
Item Description of settings
[DNR SW]
Enables/disables the noise reduction function.
[OFF], [ON]
Factory setting: [ON]
[DNR LEVEL]
Sets the level of noise reduction.
[1]…[5]
Factory setting: [3]
[SCENE FILE]
Item Description of settings
[MODE] Selects the operation mode.
[LOAD], [STORE]
Factory setting: [LOAD]
[FILE NO.] Selects a le number.
When [MODE] is [LOAD]: [OFF], [1]…[8]
When [MODE] is [STORE]: [1]…[8]
Factory setting: [1]
[FILE NAME] Enters a le name. (15 characters or less)
Factory setting: [SCENE1]
[EXECUTE] Selects whether to execute with the congured settings.
[NO], [YES]
To Next Page
Loading...
