Timer
Recording
New Timer Programme
Press OK to store new programme.
Remain
No. Name
Date Start Stop
Mode
Drive
space
Drive
HDD DVD 1:58 SP30:24 SP
VHS TUE 14.10.08. 12:53:00
—:— —
A
C
B
A Icons
z
Timer recording standby is activated.
*
This programme is currently recording.
Programmes are overlapped. Recording of the
programme with the later start time starts when the
earlier programme fi nishes recording.
Q
You stopped a weekly or daily timer recording. The icon
disappears the next time the timer programme starts
recording.
The disc was full so the programme failed to record.
The programme was copy-protected so it was not
recorded.
The programme did not complete recording because
the disc is dirty or some other reason.
Timer programmes set to Auto Renewal Recording
(➡ 31).
Titles that have been rerouted to the HDD
(Displayed while recording.)
Drive Recording drive is set to HDD, DVD or VHS.
B Message displayed in the “Drive space” line
OK: Displayed if the recording can fi t in the remaining
space.
HDD
DVD
J (Date):
For recordings made daily or weekly, the display
will show until when recordings can be made (up
to a maximum of one month from the present
time) based on the time remaining on the
disc.
HDD
DVD
! : It may not be possible to record because:
– The disc is write-protected.
DVD
– There is no more space left.
HDD
DVD
– The number of possible titles has reached its
maximum.
HDD
DVD
– The new timer recording will completely or
partially record over this timer recording.
– –: When the drive is set to VHS, “– –” is displayed.
Relief: Timer programmes that will be relief recorded to
the HDD.
C Channel name, programme name and other
information are displayed.
■ To change a programme
Press [
e
,
r
] to select the programme and press [OK]. (➡ 30,
right column, step 3)
■ To delete a programme
Press [
e
,
r
] to select the programme and press [DELETE ¼].
You can also delete a programme with the following steps
1 Press [
e
,
r
] to select the programme and press [OPTION].
2 Press [
e
,
r
] to select “Delete” and press [OK].
■ To resolve overlapping
Press [
e
,
r
] to select the programme with and press [OK].
Then follow the on-screen instructions.
■ To exit the timer recording list
Press [PROG/CHECK].
Note
y Programmes that failed to record are deleted from the timer
recording list at 4 a.m. two days later.
y “-------” is displayed on a series recording item if there will be no
episode of the series for the next 8 days. We recommend you
delete the “-------” item.
If the “Overlapped Timer Recording”
screen appears
If you set a timer recording that will overlap with other timer
recordings using the GUIDE Plus+ system, the “Overlapped Timer
Recording” screen appears to help you resolve the overlapping.
Follow the on-screen instructions.
Language for digital broadcast with
multi-audio or multi-subtitle
In timer recording of digital broadcast with multi-audio or
multi-subtitle, audio and subtitle language to be recorded will follow
the setting of “DVB Preferred Language” in the Setup menu (➡ 72).
Notes on timer recording
y When a timer recording is set, DVDs that were recorded using a
different TV system cannot be played unless the TV system is
changed in the Setup menu (➡ 75) or the timer recording has
completed or has been cancelled.
y Timer recordings are activated regardless of whether the unit is
turned on/off.
y Timer recordings begin when the set time is reached even when
playing.
y Timer recordings do not begin while editing or copying in normal
speed mode (➡ 53).
y If the unit is turned on when timer recording begins, it remains
turned on after recording fi nishes. It does not turn off automatically.
You can turn the unit off during timer recording.
y If the unit is not put in the timer recording standby mode at the last
10 minutes before the programmed timer recording starting time,
“
z
” fl ashes on the unit’s display.
y When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part at
the beginning of the later programmes.
Recorded Recorded
ProgrammeProgramme
Not recorded
y The “Overlapped Timer Recording” screen may be displayed
immediately after you turn on this unit, if new overlapping
occurred. Refer to “Check, change or delete a programme, or
resolve overlapping” (➡ left).
To Next Page
Loading...
Need help?
General
