Panasonic Diga DMR-EX98V - Copying Still Pictures; Copying All the Still Pictures on the USB Memory-Copy All Pictures; Copying New Still Pictures on the SD Card-Copy New Pictures; Copying Using the Copying List

62
RQT9090
Copying still pictures
HDD RAM USB SD
y SDHC Memory Cards used for recording with this unit can only be
used with other SDHC Memory Card-compatible equipment.
SDHC Memory Cards cannot be used with equipment that is only
compatible with SD Memory Cards.
y You cannot copy pictures recorded to DVD-R, DVD-R DL or CD-R/
CD-RW.
y Still pictures copied from USB memories or SD cards are grouped
by the shooting date in the HDD or DVD-RAM.
Copying all the still pictures on the
USB memory—Copy All Pictures
USB
p
HDD
or
RAM
1 While stopped
Insert the USB memory (➡ 17).
The menu is automatically displayed.
OK
RETURN
SELECT
USB device
Play Video (DivX)
Play Pictures (JPEG)
Copy Pictures (JPEG)
Play Music (MP3)
Copy Music (MP3)
Update CD database on HDD
2 Press [
e
,
r
] to select “Copy Pictures
(JPEG)” and press [OK].
Copy All Pictures
Copy from
Copy to
USB
HDD
3 Press [
e
,
r
] to select “Copy to” and
press [
w
,
q
] to select the drive.
4 Press [
e
,
r
,
w
,
q
] to select “Copy”
and press [OK].
To stop copying
Press and hold [RETURN] for 3 seconds.
To return to the previous screen
Press [RETURN].
Note
y The structure of folders on the USB memory may not be the same
at the copy destination.
y If the space on the destination drive runs out or the number of
fi les/folders to be copied exceeds the maximum (➡ 16), copying
will stop partway through.
y You cannot copy the information about the picture rotation.
Copying new still pictures on the SD
card—Copy New Pictures
SD
p
HDD
or
RAM
This unit saves information about imported still pictures. Therefore, if
still pictures are imported from the same SD card, then only new
still pictures will be imported.
1 While stopped
Insert the SD card (➡ 17).
The menu is automatically displayed.
OK
RETURN
SELECT
SD Card
Play Pictures (JPEG)
Copy Pictures (JPEG)
2 Press [
e
,
r
] to select “Copy Pictures
(JPEG)” and press [OK].
Copy New Pictures
Copy from
Copy to
SD CARD
HDD
3 Press [
e
,
r
] to select “Copy to” and
press [
w
,
q
] to select the drive.
4 Press [
e
,
r
,
w
,
q
] to select “Copy”
and press [OK].
To stop copying
Press and hold [RETURN] for 3 seconds.
To return to the previous screen
Press [RETURN].
Note
y This unit saves the information on up to 12,000 still pictures and
30 SD cards. If additional still pictures are imported, then the older
information will be deleted.
y If the space on the destination drive runs out or the number of
fi les/folders to be copied exceeds the maximum (➡ 16), copying
will stop partway through.
y You cannot copy the information about the picture rotation.
Copying using the copying list
HDD RAM SD
1 While stopped
Press [FUNCTION MENU].
2 Press [
e
,
r
] to select “To Others” and
press [OK].
3 Press [
e
,
r
] to select “Advanced
Copy” and press [OK].
The menu is automatically displayed.
0
Cancel All
1 Copy Direction
Source
SD CARD
Copy
2 Copy Mode
3 Create List
PICTURE High Speed
SD CARD t HDD
Destination
HDD
y If you are not going to change the registered list, press [
r
]
several times (➡ step 7).
4 Set the copy direction.
y If you are not going to change the copying direction, press
[
r
] (➡ step 5).
1 Press [
e
,
r
] to select “Copy Direction” and press [
q
].
2 Press [
e
,
r
] to select “Source” and press [OK].
3 Press [
e
,
r
] to select the drive and press [OK].
4 Press [
e
,
r
] to select “Destination” and press [OK].
5 Press [
e
,
r
] to select the drive and press [OK].
The same drive as the copy source can be selected.
6 Press [
w
] to confi rm.
5 Set the copy mode.
y If you are not going to change the recording mode, press
[
r
] (➡ step 6).
1 Press [
e
,
r
] to select “Copy Mode” and press [
q
].
2 Press [
e
,
r
] to select “Format” and press [OK].
3 Press [
e
,
r
] to select “PICTURE” and press [OK].
“Recording Mode” is automatically set to “High Speed”.
4 Press [
w
] to confi rm.
RQT9090-LDMR-EX98VEC-EGen.indb62RQT9090-LDMR-EX98VEC-EGen.indb62 2008/04/3021:55:102008/04/3021:55:10