COPY Navigator/Copying list icons and functions
COPY Navigator/Copying list indicators
Titles and playlists that can be copied in high
speed mode to DVD-R, DVD-R DL, DVD-RW
(DVD-Video format), +R, +R DL, +RW
Titles and playlists that can be copied in high
speed mode to DVD-R, DVD-R DL, DVD-RW
(DVD-Video format)
(However, titles and playlists cannot be copied in
high speed mode to +R, +R DL, +RW)
+R DL
is displayed, but copy cannot be
performed.
Title with “One time only recording” restriction
(➡ 23, When recording the “One time only
recording” broadcasts)
Titles deleted from the HDD by “One time only
recording” restriction after copying. (➡ 23, When
recording the “One time only recording”
broadcasts)
Title or playlist contains still picture(s)
y Still picture(s) cannot be copied.
(NTSC)
(PAL)
Title or playlist recorded using a different encoding
system from that of the TV system currently
selected on the unit.
y Titles and playlists displaying these marks
cannot be selected.
Data size of each registered item
Destination Capacity: 4343MB
No. Size Name of item
Size
New item (Total=0)
Create copy list.
Page
Size:
Data size recorded to the copy
destination
y When copying at normal speed, the
total data size will change according to
the recording mode.
y The total data size shown may be
larger than the sum of the data sizes
for each registered item, because of
data management information being
written to the copy destination, etc.
To play DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R and
+R DL on other players, it is necessary to fi nalise them after copy.
■ To edit the copying list
Select the item after step 6–5 (➡ 58)
1 Press [OPTION].
2 Press [
e
,
r
] to select the operation and press
[OK].
Delete All:
Delete all items registered on the copying list.
Press [
w
,
q
] to select “Yes” and press [OK].
Add:
Add new items to the copying list.
1 Press [
e
,
r
,
w
,
q
] to select the title or playlist and press [
h
].
A check mark is displayed. Repeat this step until you select all
necessary items.
y Press [
h
] again to cancel.
2 Press [OK].
Delete:
Delete the selected items.
Press [
w
,
q
] to select “Yes” and press [OK].
Move:
Move selected items or change the order of items on the copying
list.
Press [
e
,
r
] to select the destination and press [OK].
To cancel all registered copying setting and lists
After performing steps 1–3 (➡ 58)
1 Press [
e
,
r
] to select “Cancel All” and press [OK].
2 Press [
w
,
q
] to select “Yes” and press [OK].
y The settings and lists may be cancelled in the following situations.
– When a title, still picture, etc. has been recorded or deleted at
the copy source
– When steps have been taken, for instance, to turn off the unit,
open the tray, change the copy direction, etc.
Copying a fi nalised DVD-R, DVD-R DL,
DVD-RW (DVD-Video format), +R and
+R DL
DVD-V
p
HDD
VHS
You can copy the content of fi nalised DVD-R, DVD-R DL, DVD-RW
(DVD-Video format), +R, and +R DL to the HDD or VHS and re-edit
the content copied to the HDD.
While playing a disc, the content being played is copied to the HDD
or VHS according to the set time.
y
HDD
If you perform search, frame-by-frame or pause while
copying, that portion of title is not recorded.
y When “Rec for High Speed Copy” (➡ 73) is set to “On” and you
make a copy, the copy will be made using the picture size selected
in “Aspect for Recording” (➡ 73) of the Setup menu.
y Operations and on screen displays during copy are also
recorded.
y Almost all DVD-Video on sale have been treated to prevent
illegal copying, and cannot be copied.
y The following cannot be copied: Video CD, Audio CD and so on.
Preparation
y Insert the fi nalised disc (➡ 17).
After performing steps 1–5 (“Format” is automatically set to “DVD-
Video”) (➡ 58, Copying using the copying list–Advanced Copy)
1 Set “Copy Time”.
y If you are not going to change the setting (➡ step 2).
Setting the unit to copy according to the set time
1 Press [
e
,
r
] to select “Copy Time” and press [
q
].
2 Press [
e
,
r
] to select “Time Setting” and press [OK].
y Setting the unit to copy all the content on the disc
3 Press [
e
,
r
] to select “Off” and press [OK].
4 Press [
w
] to confi rm.
Copy will continue until there is not enough available
recording space on the HDD or VHS.
y Setting the copying time
3 Press [
e
,
r
] to select “On” and press [OK].
4 Press [
e
,
r
] to select “Copy Time” and press [OK].
Cancel All
1 Copy Direction
Set the time a few minutes
longer.
Min.
Copy
2 Copy Mode
3 Copy Time
DVD-Video XP
Start Copying
Press OK to change the setting.
DVD t HDD
Hour
5 Press [
w
,
q
] to select “Hour” and “Min.” and press [
e
,
r
]
to set the recording time.
6 Press [OK].
7 Press [
w
] to confi rm.
Copying to the HDD or VHS continues for the set time
even after the content being played fi nishes.
y Set a few minutes longer than the source title, in order to
include the operation time before play begins.
y You can also set the recording time with the numbered
buttons.
2 Press [
e
,
r
] to select “Start Copying”
and press [OK].
Press [
w
,
q
] to select “Yes” and press [OK] to start copying.
The disc top menu is displayed.
y Disc play automatically begins from title 1 when “Title 1” is
selected from the “Auto-Play Select” menu when fi nalising
the disc (➡ 70).
(Continued on the next page)
Delete All
Add
Delete
Move
Advanced Copy
To Next Page
Loading...
Need help?
General
