Panasonic DP-C266

219
Chapter 9 Solving Problems
726 Received an error response
from the DNS server.
Check the POP server name.
Check the SMTP server name.
Operating
Instructions (For
Administrator
Setup)
727 Communication error occurred
while communicating with
remote station.
Check the remote station.
728 Communication error occurred
with the SMTP Direct
transmission.
Check the remote station.
729 Failed to authenticate (SMTP
Authentication) when connecting
with the SMTP server.
Check the SMTP authentication user name
and password.
Contact the network administrator.
Operating
Instructions (For
Function
Parameters)
730 Cannot retrieve the Journal or
program the Internet Parameters
and the Auto Dialer remotely via
Email from a PC.
Check that the Fax Parameter “158 PC
Remote Update” is set to “Valid”.
Operating
Instructions (For
Function
Parameters)
731 The dialer buffer for manual
dialing was full (70 stations)
when the Relay transmission
request was received.
Request the originator to re-send the Relay
transmission request after the reserved
communication is finished.
734 Internet Fax communications
and POP reception functions are
disabled.
Contact the device administrator.
800/814/816/
825
Unit was requested to relay a
document or Confidential
Communication but has no
capability.
Check with the other party.
815 Mailbox is full. Delete confidential documents. Deleting a
Confidential
Document (See
page 74)
826 The received sub-address is not
pre-programmed in the Address
Book.
Check entries in the Address Book.
Check the entry of the sub-address of the
remote station.
Address Book
(See page 176)
850 The Relay transmission was
canceled at a relay station
because the Relay XMT
passwords did not match.
Check the password. Operating
Instructions (For
Function
Parameters)
870 Memory overflow occurred while
storing documents into memory
for transmission.
Transmit documents without storing into
memory.
Add SD Memory Card in the machine.
Direct
Transmission
(See page 48)
Info. Code Problem Action Refer to