82
Chapter 3 Convenient Fax Features
Setting Password-Protected Transmission
To always utilize Password-protected transmissions, follow the steps below.
z You must program a password (4 digits) in advance.
1
Press the Function key to open the
Function Parameters screen.
2
Select “Fax/Email Settings”.
3
Select “04 Key Operator Mode”.
4
Enter the Key Operator password, and
then select “OK”.
z If you make a mistake, press the Clear key
or select “Back Space” to delete.
5
Select “01 Fax Parameters”.
6
Select “40-79”.
z You can also proceed to step 8 by entering
43 with the Keypad and pressing the Start
key.
7
Select “43 Password-Transmit”.
8
Enter the password (4 digits), and then
select “OK”.
z If you make a mistake, select “Clear” to
delete.
To Next Page
Loading...
