12.1.4 PC print features
Feature Code Selection
Input tray in PCL #760 To set the input tray in PCL.
M1N “#1” (default): Standard input tray
M2N “#2”: Multi-purpose tray
M3N “#3”: Lower input tray
M4N “#1+#2+#3”, “#1+#2”, “#1+#3” or “#2+#3”
*1
*1 These options are displayed only when the paper size (feature #380 on
page 74, feature #381 on page 75 or feature #382 on page 75) and the media
type (feature #383 on page 75, feature #384 on page 76 or feature #385 on
page 76) match. If either is changed, this setting will be changed accordingly.
Number of copies
#762 1. MMENUN A MBNM7NM6NM2N A MSETN
2. Enter the number of copies from “001” to “999”, using the dial keypad.
R The default setting is “001”.
3. MSETN A MMENUN
Paper size #763 To set the recording paper size.
M0N “16K”
M1N “LETTER”
M2N “LEGAL”
M3N “A4” (default)
M4N “A5”
M5N “A6”
M6N “B5(ISO)”
M7N “B5(JIS)”
M8N “B6(ISO)”
M9N “B6(JIS)”
MGN “FOLIO/FS”: F4, Folio, Foolscap
MBN “OFICIO”: Mexico Oficio, India Legal
Recording paper
direction in PCL
#765 To set the recording paper direction in PCL.
M1N “PORTRAIT” (default)
M2N “LANDSCAPE”
A4 wide printing in
PCL
#766 If “ON” is selected, the margin and printable area of A4 recording paper will be
changed so that 80 characters in 10 cpi font may be printed on a line.
M0N “OFF” (default)
M1N “ON”
Setting the line per
page in PCL
#767 To set the number of lines per page in PCL printing.
1. MMENUN A MBNM7NM6NM7N A MSETN
2. Enter the number of lines per page from “005” to “128”, using the dial
keypad.
R The default setting is “064”.
3. MSETN A MMENUN
Font source in
PCL
#768 “DOWNLOAD FONT” can be selected after the downloaded font is registered to the
unit.
M1N “RESIDENT” (default): The document will be printed using resident font.
M2N “DOWNLOAD FONT”: The document will be printed using download font.
84
12. Programmable Features
To Next Page
Loading...
