EasyManua.ls Logo

Panasonic HEVC Advance AW-UE160WP - Page 137

Panasonic HEVC Advance AW-UE160WP
214 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Crop video
<NOTE>
CROP images without overlays such as OSD menus are output
from Crop video.
When [ST2110] is [Off], and [UHD Crop] – [Crop Mode] is set to
[Off], Crop video is not output.
Format
Display the output format for [Crop video].
Destination Address
Enter the [Crop video] transmission destination IP address.
The setting range is the same as [Main video].
Factory settings: 239.1.0.2
Destination Port [1024 to 65535]
Enter the [Crop video] transmission destination port number.
The setting range is the same as [Main video].
Factory settings: 49312
Monitor video
<NOTE>
The same images as 3G SDI OUT2/PM are output from Monitor
video.
When [ST2110] is [Off] and [Output] – [3G SDI Out2/PM] –
[OUTPUT SELECT] is set to [RETURN], Monitor video is not output.
Format
Display the output format for [Monitor video].
Destination Address
Enter the [Monitor video] transmission destination IP address.
The setting range is the same as [Main video].
Factory settings: 239.1.0.3
Destination Port [1024 to 65535]
Enter the [Monitor video] transmission destination port number.
The setting range is the same as [Main video].
Factory settings: 49313
Input1 audio
<NOTE>
When [Audio] – [CH Select] is [Input2], the Input1 Audio of ST2110
is not output.
Destination Address
Enter the [Input1 audio] transmission destination IP address.
The setting range is the same as [Main video].
Factory settings: 239.2.0.1
Destination Port [1024 to 65535]
Enter the [Input1 audio] transmission destination port number.
The setting range is the same as [Main video].
Factory settings: 49321
Input2 audio
<NOTE>
When [Audio] - [CH Select] is [Input1], the Input2 Audio of ST2110
is not output.
Destination Address
Enter the [Input2 audio] transmission destination IP address.
The setting range is the same as [Main video].
Factory settings: 239.2.0.2
Destination Port [1024 to 65535]
Enter the [Input2 audio] transmission destination port number.
The setting range is the same as [Main video].
Factory settings: 49322
137
Web screen configurations (continued)

Table of Contents

Related product manuals