z NMOS
Make NMOS settings.
<NOTE>
• This menu is not displayed when [ST2110] is [Off].
NMOS control [On, Off]
Set Off/On for the NMOS function.
Factory settings: Off
<NOTE>
• To set [NMOS] to [On], the SMPTE ST2110 software key
(AW-SFU60) needs to be enabled.
Status
Displays the connection status of the NMOS RDS server.
UNREGISTERED Not connected
REGISTERING Currently discovering RDS server
REGISTERED Registered to RDS server
P2P MODE Connected via P2P with NMOS controller
IS‑04 Port [1024 to 65535]
Enter the port number for NMOS IS-04.
Factory settings: 50040
IS‑05 Port [1024 to 65535]
Enter the port number for NMOS IS-05.
Factory settings: 50050
Label setting
Select the automatic/manual label name used with NMOS.
Manual The user enters the label name manually.
Auto The label name is a fixed value.
Factory settings: Auto
<NOTE>
• The label name when set to Auto is “UE160_
****
” (asterisks are the
last four digits of the MAC address).
Label prefix
Enter the label name used with NMOS.
This cannot be changed if the Label setting is Auto.
Factory settings: UE160_
****
(asterisks are the last four digits of
the MAC address)
Discovery
Set the RDS server discovery method.
Auto Discover automatically in the order of uniDNS/mDNS.
mDNS Discover with mDNS.
uniDNS Discover with unicast DNS.
Factory settings: Auto
<NOTE>
• If an RDS server cannot be discovered in any of the modes, the
mode automatically switches to P2P.
139
Web screen configurations (continued)
To Next Page
Loading...
