Panasonic KV-N1058X - Page 130

12. Install the two new rubber rollers onto the paper feed roller shaft.
• Make sure the left ( white) and right ( black) paper feed rollers are installed correctly.
• After confirming the tabs ( ) of both rubber rollers are facing outwards, insert the rubber rollers onto
the paper feed roller shaft until they click into place.
3
3
1
2
Notice
• Inserting a rubber roller with the tab facing inwards may damage the roller.
13. Install the paper feed roller with the new rubber rollers.
• Insert the short side of the paper feed roller shaft ( ) to the roller mount, and then insert the gear ( )
in the direction indicated by the arrow.
1
2
14.3 Replacing the Rollers
130