8.1.1.15 Preview Setting
In case of push scan, you can preview the scanned image on the LCD. After checking the image, you can
choose to send an image or stop scanning.
1. Touch the icon ( ) on the home screen.
2. Touch [Function].
3. Touch the icon ( ) until [Preview] is displayed.
4. Configure [Preview] setting.
• When [Preview] is set to [Off], scan preview is not displayed.
• When [Preview] is set to [First Document], the first page is displayed.
• When [Preview] is set to [Last Document], the last page is displayed.
• When [Preview] is set to [First and Last Document], both the first page and the last page are
displayed.
5. Touch the icon ( ) to complete your selection.
Note
Preview may not be displayed in the following cases.
• When using scan server
• Scan to PC
• Job Scan
8.1.1 Preparation
66
To Next Page
Loading...
