8.1.2.2 Basic operations for specifying scan settings
Touch the desired setting.
• To check or change the scan setting, touch the icon again.
The settings screen will be displayed.
– After changing the settings, you can save them by touching the icon ( ).
– After changing the settings, start scanning by pressing the Start/Stop button ( ). The changed
values are temporarily saved at the left end of the scan settings.
These settings are cleared if you touch the home button ( ) or turn off the unit.
• To add an item, touch the icon ( ). (Maximum 20 items)
The settings screen will be displayed. After specifying the settings, touch the icon ( ) to save them.
8.1.2 Scanning by selecting "Output to" and the scan settings from the home screen
72
To Next Page
Loading...
