8.1.1.11 Registering icons
You can register icons to display on the custom screen (up to 8 icons).
Prepare icons in advance with the following conditions.
• 120 x 120 pixels
• 24-bit color bitmap
1. Launch Configuration Web.
• For details, refer to "12.1 Launch Configuration Web" (page 93).
2. Open the [Scan] tab.
3. Click [Custom Icon].
4. Click the icon ( ) to add a new icon. Click the icon ( ) to change the icon.
5. Click [Browse] and specify the icon file by following the on-screen instructions.
6. Click [Submit].
8.1.1.12 Register a Job Setting List
To perform push scan using jobs, configure the following settings.
1. Start Image Capture Plus.
• Select [Image Capture Plus Standard] as the application mode.
2. On the [Scan Setting] menu, enable [Job Scan Mode].
• You cannot enable [Job Scan Mode] if any documents are left in [Document List].
3. On the [Scan Setting] menu, click [Job Setting List].
4. Click [Add] button, and specify the settings.
• The [Job Setting] dialog box is displayed.
5. Click [Save Setting] to save the settings.
8.1.1 Preparation
64
To Next Page
Loading...
