Default Value Not stored.
Configuration File Reference CONFERENCE_SERVER_URI
First-digit Timeout
Description Specifies the length of time, in seconds, within which the first digits of
a dial number must be dialed.
Value Range 1–600 (s)
Default Value 30
Configuration File Reference FIRSTDIGIT_TIM
Inter-digit Timeout
Description Specifies the length of time, in seconds, within which subsequent
digits of a dial number must be dialed.
Value Range 1–15 (s)
Default Value 5
Configuration File Reference INTDIGIT_TIM
Timer for Dial Plan
Description Specifies the length of time, in seconds, that the unit waits when a "T"
or "t" has been entered in the dial plan.
Value Range 1–15 (s)
Default Value 5
Configuration File Reference MACRODIGIT_TIM
Enable # Key as delimiter
Description Selects whether the # key is treated as a regular dialed digit or a
delimiter, when dialed as or after the second digit.
Value Range
• Yes: # is treated as the end of dialing delimiter.
• No: # is treated as a regular dialed digit.
Default Value Yes
Configuration File Reference POUND_KEY_DELIMITER_ENABLE
International Call Prefix
Description Specifies the number to be shown in the place of the first "+" symbol
when the phone number for incoming international calls contains "+".
Value Range Max. 8 characters (consisting of 0–9, *, and #)
Default Value Not stored.
Configuration File Reference INTERNATIONAL_ACCESS_CODE
4.6.1 Call Control
Document Version 2016-05 Administrator Guide 119
To Next Page
Loading...
