Button Function
Refresh Updates the status information displayed on the screen. This button is
displayed in the upper-right area of the [Network Status] and [VoIP Status]
screens.
Entering Characters
In the Web user interface, when specifying a name, message, password, or other text item, you can enter
any of the ASCII characters displayed in the following table with a white background.
However, there are additional limitations for certain types of fields as follows:
• Number field
– You may only enter a sequence of numeric characters.
• IP Address field
– You can enter the IP address using dotted-decimal notation (i.e., "n.n.n.n" where n=0–255).
– With IPv6, you can enter the IP address using dotted-decimal notation (i.e., "n:n:n:n:n:n:n:n" where
n=0-FFFF, abbreviation available).
• FQDN field
– You can enter the IP address using dotted-decimal notation (i.e., "n.n.n.n" where n=0–255).
– With IPv6, the IP address is enclosed in square brackets ("[" and "]").
Example: http://[2001:db8:1f70::999:de8:7648:6e8]/
• Display Name field (→ see [Display Name] in 4.6.2.1 Call Features)
– This is the only field in which you can enter Unicode characters.
Result Messages
When you click [Save] after changing the settings on the current configuration screen, one of the following
messages will appear in the upper-left area of the current configuration screen:
Result Message Description Applicable Screens
Complete The operation has successfully
completed.
All screens except
4.6.7 Export Phonebook
1.1.6 Web User Interface Programming
20 Administrator Guide Document Version 2016-05
To Next Page
Loading...
