Firmware Version
Description Specifies the new firmware version of the unit.
Value Range 6 characters
xx.xxx [x=0–9]
Default Value Not stored.
Configuration File Reference FIRM_VERSION
4.7.3 Export Logging File
This screen allows you to specify the Logging File to export when logging.
4.7.3.1 Export Logging File
Logging File Type
Description Selects the Logging File Type setting.
Value Range
• Power Down
• Event
• SIP Packet
Note
• The line break code for the log file is <LF>.
• If a file is exported when Power Down is selected, the saved
file is power.log.
• If a file is exported when Event is selected, the saved file is
event_log.txt.
• If a file is exported when SIP Packet is selected, the saved file
is sip_trace_log.txt.
Default Value Power Down
4.7.3 Export Logging File
146 Administrator Guide Document Version 2016-05
To Next Page
Loading...
