Button
Parameter 1 Parameter 2
Description Value Description Value
Call Park Call parking
number
*2
Up to 16 digits
- -
Call Park Retrieve Park retrieve
number
*2
Up to 16 digits Line No. 1–16
Network Camera Network Camera
Number
1–16 - -
*1
More than 48 BLF keys can be programmed, but LED status indication is available only up to 48 keys.
*2
Values may vary depending on your phone system dealer/service provider.
[Setting Example]
The following screen shows an example of setting flexible keys.
Description:
• Button 1 is set to log in and log out of an ACD group on line 6.
• Buttons 2 and 5 are set to show the status of a certain extension. They can also be used to call that
extension and transfer calls to it.
*1
• Buttons 3 and 6 are set to make calls to a certain destination using the One-Touch Dialing feature.
• Button 4 is set to make calls to a certain destination using the Line feature.
• Button 7 is set to log in and log out of an ACD group on line 5.
*1
You can also assign extension numbers automatically to BLF buttons using the information in the server’s resource list without
having to input information here.
6.3.2 Settings using Configuration File Programming
Flexible keys can be configured by configuration file programming using a combination of 3 parameters:
6.3.2 Settings using Configuration File Programming
Document Version 2016-05 Administrator Guide 319
To Next Page
Loading...
