Maintenance
Menu Item Section Title Setting
Access
Level
*1
Ref.
U A
Provisioning
Maintenance
Provisioning
Maintenance
Standard File URL
*2
ü
page 143
Product File URL
*2
ü
page 143
Master File URL
*2
ü
page 144
Cyclic Auto Resync
*2
ü
page 144
Resync Interval
*2
ü
page 144
Time Resync
*2
ü
page 144
Header Value for Resync
Event
*2
ü
page 144
Firmware
Maintenance
Firmware Maintenance Enable Firmware Update
*2
ü
page 145
Firmware File URL
*2
ü
page 145
Firmware Version
*2
ü
page 146
Export Logging
File
Export Logging File Logging File Type
ü
page 146
Reset to Defaults Reset to Carrier
Defaults
The following settings will be
reset to carrier default values
when you click [Reset to
Carrier Defaults].
ü
page 147
Restart Restart Click [Restart] to proceed.
Restarting will take a few
moments.
ü
page 147
*1
The access levels are abbreviated as follows:
U: User; A: Administrator
A check mark indicates that the setting is available for that access level.
*2
This setting can also be configured through configuration file programming.
4.2 Status
This section provides detailed descriptions about all the settings classified under the [Status] tab.
4.2.1 Version Information
This screen allows you to view the current version information such as the model number and the firmware
version of the unit.
4.2 Status
Document Version 2016-05 Administrator Guide 57
To Next Page
Loading...
