1.1.6.3 Before Accessing the Web User Interface
Recommended Environment
This unit supports the following specifications:
HTTP Version HTTP/1.0 (RFC 1945), HTTP/1.1 (RFC 2616)
Authentication Method Digest
The Web user interface will operate correctly in the following environments:
Operating System Microsoft
®
Windows
®
7 or Windows 8 operating system
Web Browser Windows Internet Explorer
®
7, Windows Internet Explorer 8, Windows
Internet Explorer 9, Windows Internet Explorer 10, Windows Internet
Explorer 11 web browser, Firefox
®
(32.0.3), Google
®
Chrome™
(37.0.2062.103)
Language (recommended) English
Opening/Closing the Web Port
To access the Web user interface, you must open the unit’s Web port beforehand. For details, refer to the
Operating Instructions on the Panasonic Web site (→ see Introduction).
Configuring Settings from the Unit
To open the unit’s Web port
1.
In standby mode, tap or to select "Basic Settings".
2.
Tap "Basic Settings".
3.
Tap
or to select "Other Option".
4.
Tap "Other Option".
5.
Tap "Embedded Web".
6.
Select "On", and then tap "OK".
To close the unit’s Web port
1.
In standby mode, tap or to select "Basic Settings".
2.
Tap "Basic Settings".
3.
Tap
or to select "Other Option".
4.
Tap "Other Option".
5.
Tap "Embedded Web".
6.
Select "Off", and then tap "OK".
1.1.6 Web User Interface Programming
16 Administrator Guide Document Version 2016-05
To Next Page
Loading...
