Value Range Max. 64 characters
Note
• If "{mac}" is included in this parameter, it will be replaced with
the unit’s MAC address in lower-case.
• If "{MAC}" is included in this parameter, it will be replaced with
the unit’s MAC address in upper-case.
• If "{MODEL}" is included in this parameter, it will be replaced
with the unit’s model name.
• If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
Default Value Panasonic_{MODEL}/{fwver} ({mac})
Configuration File Reference HTTP_USER_AGENT
Authentication ID
Description Specifies the ID for the User account. If set, this name must be
entered to access the Web user interface at the User access level.
Value Range Max. 128 characters
Default Value Not stored.
Configuration File Reference HTTP_AUTH_ID
Authentication Password
Description Specifies the password for the User account. If set, this password
must be entered to access the Web user interface at the User access
level.
Value Range Max. 128 characters
Default Value Not stored.
Configuration File Reference HTTP_AUTH_PASS
4.3.3.2 Proxy Server
Enable Proxy
Description Selects whether to enable or disable the HTTP proxy feature.
Value Range
• Yes
• No
Default Value No
Configuration File Reference HTTP_PROXY_ENABLE
Proxy Server Address
Description Specifies the IP address or FQDN of the proxy server.
Value Range Max. 256 characters
Default Value Not stored.
4.3.3 HTTP Client Settings
72 Administrator Guide Document Version 2016-05
To Next Page
Loading...
