Panasonic KX-HDV430 - Phone User Interface Programming; Opening;Closing the Web Port

3.1 Phone User Interface Programming
This section provides information about the features that can be configured directly from the unit, but that
are not mentioned in the Operating Instructions.
3.1.1 Opening/Closing the Web Port
To access the Web user interface, you must open the unit’s Web port beforehand.
To open the unit’s Web port
1.
In standby mode, tap or to select "Basic Settings".
2.
Tap "Basic Settings".
3.
Tap
or to select "Other Option".
4.
Tap "Other Option".
5.
Tap "Embedded Web".
6.
Select "On", and then tap "OK".
To close the unit’s Web port
1.
In standby mode, tap or to select "Basic Settings".
2.
Tap "Basic Settings".
3.
Tap
or to select "Other Option".
4.
Tap "Other Option".
5.
Tap "Embedded Web".
6.
Select "Off", and then tap "OK".
3.1 Phone User Interface Programming
44 Administrator Guide Document Version 2016-05