Note
• When you change the settings on this screen and click [Save], after the message "Complete" has
been displayed, the unit will restart automatically with the new settings applied. If a unit is on a call
when "Complete" has been displayed, the unit will restart after the unit returns to idle.
4.3.2.1 Link Speed/Duplex Mode
LAN Port
Description Selects the connection mode (link speed and duplex mode) of the
LAN port.
Value Range
• Auto Negotiation
• 100Mbps/Full Duplex
• 100Mbps/Half Duplex
• 10Mbps/Full Duplex
• 10Mbps/Half Duplex
Default Value Auto Negotiation
Configuration File Reference PHY_MODE_LAN
PC Port
Description Selects the connection mode (link speed and duplex mode) of the PC
port.
Value Range
• Auto Negotiation
• 100Mbps/Full Duplex
• 100Mbps/Half Duplex
• 10Mbps/Full Duplex
• 10Mbps/Half Duplex
Default Value Auto Negotiation
4.3.2 Ethernet Port Settings
68 Administrator Guide Document Version 2016-05