Panasonic KX-HDV430 - LDAP Settings

Port (Group 1–5)
Description Specifies the port number for multi-cast paging for each channel
group.
Value Range 0–65535
0: Disable
Default Value 0
Configuration File Reference MPAGE_PORTm
Priority (Group 1–3)
Description Selects the priority of the low priority channel group.
The priority of multi-cast paging group1-3 is lower than the talking.
Priority 4 is higher than Priority 5.
Value Range 4, 5
Default Value 5
Configuration File Reference MPAGE_PRIORITYm
Label (Group 1–5)
Description Specifies a label for each channel group.
Value Range Max. 24 characters
Default Value Not stored.
Configuration File Reference MPAGE_LABELm
Enable Transmission (Group 1–5)
Description Selects the sending multi-cast paging.
Value Range
• Yes
• No
Default Value No
Configuration File Reference MPAGE_SEND_ENABLEm
4.3.6 LDAP Settings
This screen allows you to change the LDAP Settings.
4.3.6 LDAP Settings
Document Version 2016-05 Administrator Guide 75