4.7.2 Firmware Maintenance
This screen allows you to perform firmware updates automatically.
4.7.2.1 Firmware Maintenance
Enable Firmware Update
Description Selects whether to perform firmware updates when the unit detects a
newer version of firmware.
Note
• Firmware updates using TR-069 can be performed regardless
of this setting.
Value Range
• Yes
• No
Default Value Yes
Configuration File Reference FIRM_UPGRADE_ENABLE
Firmware File URL
Description Specifies the URI where the firmware file is stored.
Note
• This setting is available only when [Enable Firmware Update]
is set to [Yes].
Value Range Max. 384 characters
Note
• If "{fwver}" is included in this parameter, it will be replaced with
the value specified in [Firmware Version]. For details about
the formats, see 2.1.3 Server Address Formats.
Default Value Not stored.
Configuration File Reference FIRM_FILE_PATH
4.7.2 Firmware Maintenance
Document Version 2016-05 Administrator Guide 145
To Next Page
Loading...
