Value Range 6–64 characters (except !, ", #, $, %, &, ', (, ), @, *, +, ,, /, :, ;, <, =,
>, ?, [, ], ^, `, {, |, }, ~, \ and space)
Default Value adminpass
New Password
Description Specifies the new password to use to authenticate the Administrator
account when logging in to the Web user interface.
Value Range 6–64 characters (except !, ", #, $, %, &, ', (, ), @, *, +, ,, /, :, ;, <, =,
>, ?, [, ], ^, `, {, |, }, ~, \ and space)
Note
• A hyphen (-) cannot be used as the first character.
Default Value Not stored.
Configuration File Reference ADMIN_PASS
Confirm New Password
Description Specifies the same password that you entered in [New Password]
for confirmation.
Value Range 6–64 characters (except !, ", #, $, %, &, ', (, ), @, *, +, ,, /, :, ;, <, =,
>, ?, [, ], ^, `, {, |, }, ~, \ and space)
Default Value Not stored.
4.4.4 Time Adjust Settings
This screen allows you to enable automatic clock adjustment using an NTP server and configure the
settings for DST (Daylight Saving Time), also known as Summer Time.
4.4.4.1 Synchronization (Synchronisation)
Server Address
Description Specifies the IP address or FQDN of NTP server.
4.4.4 Time Adjust Settings
94 Administrator Guide Document Version 2016-05
To Next Page
Loading...
