Programming
Type
Description References
Phone user
interface
programming
Configuring the unit’s settings directly from the unit. → 1.1.5 Phone User
Interface Programming
→ 3 Phone User Interface
Programming
Web user
interface
programming
Configuring the unit’s settings by accessing the Web
user interface from a PC connected to the same
network.
→ 1.1.6 Web User Interface
Programming
→ 4 Web User Interface
Programming
Configuration file
programming
Configuring the unit’s settings beforehand by
creating configuration files (pre-provisioning), and
having the unit download the files from a server on
the Internet and configure its own settings
(provisioning).
→ 2 General Information on
Provisioning
→ 5 Configuration File
Programming
1.1.5 Phone User Interface Programming
You can change the settings directly from the unit.
For details about the operations, refer to the Operating Instructions on the Panasonic Web site (→ see
Introduction).
For details about additional features available with direct commands, see 3 Phone User Interface
Programming.
1.1.5.1 Changing the Language for Phone User Interface
Programming
You can change the language used on the LCD. Because the language settings for the LCD of the unit are
not synchronized, you must set the languages individually for the unit.
For details about changing the setting, refer to the Operating Instructions on the Panasonic Web site (→ see
Introduction).
1.1.6 Web User Interface Programming
After connecting the unit to your network, you can configure the unit’s settings by accessing the Web user
interface from a PC connected to the same network. For details, see 4 Web User Interface Programming.
1.1.5 Phone User Interface Programming
14 Administrator Guide Document Version 2016-05
To Next Page
Loading...
