4.3.6.1 LDAP
Enable LDAP
Description Selects whether to enable or disable the LDAP service.
Value Range
• Yes
• No
Default Value No
Configuration File Reference LDAP_ENABLE
Server Address
Description Specifies the server host of LDAP.
Value Range Max. 256 characters
Default Value Not stored.
Configuration File Reference LDAP_SERVER
Port
Description Specifies the port of server.
Value Range 1–65535
Default Value 389
Configuration File Reference LDAP_SERVER_PORT
User ID
Description Specifies the authentication ID required to access the LDAP server.
Value Range Max. 128 characters
Default Value Not stored.
Configuration File Reference LDAP_USERID
4.3.6 LDAP Settings
76 Administrator Guide Document Version 2016-05
To Next Page
Loading...
