4.3.1.1 IP Addressing Mode
IP Addressing Mode
Description Selects the IP addressing mode.
Value Range
• IPv4
• IPv6
• IPv4&IPv6
Default Value IPv4
Configuration File Reference IP_ADDR_MODE
4.3.1.2 IPv4
Connection Mode
Description Selects the IP address setting mode for IPv4.
Value Range
• DHCP
• Static
Default Value DHCP
Configuration File Reference CONNECTION_TYPE
DHCP Host Name
Description Specifies the host name to option12 in DHCPv4 or option15 in
DHCPv6.
Note
• This setting is available only when [Connection Mode] is set
to [DHCP].
Value Range Max. 64 characters
Note
• If "{MODEL}" is included in this parameter, it will be replaced
with the unit's model name.
Default Value {MODEL}
Configuration File Reference DHCP_HOST_NAME
IP Address
Description Specifies the IP address for IPv4.
Note
• This setting is available only when [Connection Mode] is set
to [Static].
Value Range Max. 15 characters
n.n.n.n [n=0–255]
Default Value Not stored.
4.3.1 Basic Network Settings
64 Administrator Guide Document Version 2016-05