Value Range 0, 10–300
0: Disable
Default Value 0
Web User Interface Reference Enable Port Punching for RTP
EXTERNAL_RTP_PORTx
Value Format INTEGER
Description x=1–48
Specifies the port number of the router in Static NAT status.
Value Range 0, 1024–59998 (only even ports)
0: Disable
Default Value 0
5.3.22 SIP Settings
SIP_USER_AGENT
Value Format STRING
Description Specifies the text string to send as the user agent in the headers of
SIP messages.
Value Range Max. 64 characters
Note
• If "{mac}" is included in this parameter, it will be replaced with
the unit’s MAC address in lower-case.
• If "{MAC}" is included in this parameter, it will be replaced with
the unit’s MAC address in upper-case.
• If "{MODEL}" is included in this parameter, it will be replaced
with the unit’s model name.
• If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
• If "{sipver}" is included in this parameter, it will be replaced with
the SIP software version of the unit.
Default Value Panasonic-{MODEL}/{fwver} ({mac})
Web User Interface Reference User Agent
PHONE_NUMBER_n
Parameter Name Example PHONE_NUMBER_1, PHONE_NUMBER_2, …, PHONE_NUMBER_16
Value Format STRING
5.3.22 SIP Settings
228 Administrator Guide Document Version 2016-05
To Next Page
Loading...
