Panasonic KX-HDV430 - SRTP Settings

Description Specifies whether to send RTCP signals by SDP (Session
Description Protocol).
Value Range 0–1
– 0: Send RTCP signals using the value specified in
"RTCP_INTVL_n", if the "RTCP_ENABLE_n" parameter is enabled.
– 1: Send RTCP signals using the value specified in the SDP
attribute "a=rtcp:".
Default Value 0
RTP_CLOSE_ENABLE_n
Parameter Name Example RTP_CLOSE_ENABLE_1, RTP_CLOSE_ENABLE_2, …,
RTP_CLOSE_ENABLE_16
Value Format BOOLEAN
Description Specifies whether to enable processing to close held RTP sockets.
Value Range
• Y (Enable RTP Close)
• N (Disable RTP Close)
Default Value
N
RTCPXR_ENABLE_n
Parameter Name Example RTCPXR_ENABLE_1, RTCPXR_ENABLE_2, …, RTCPXR_ENABLE_16
Value Format BOOLEAN
Description Specifies whether to enable or disable RTCP-XR.
Value Range
• Y: Enable RTCP-XR
• N: Disable
Default Value
N
Web User Interface Reference Enable RTCP-XR
5.3.27 SRTP Settings
SRTP_CONNECT_MODE_n
Parameter Name Example SRTP_CONNECT_MODE_1, SRTP_CONNECT_MODE_2, …,
SRTP_CONNECT_MODE_16
Value Format INTEGER
Description Specifies the mode of SRTP feature.
5.3.27 SRTP Settings
Document Version 2016-05 Administrator Guide 259