Panasonic KX-HDV430 - Page 260

Value Range
• 0: SRTP
• 1: RTP/SRTP
• 2: SRTP&RTP(Panasonic PBX only)
Note
• 0: Use only SRTP for outgoing and incoming calls.
• 1: Use only RTP for outgoing calls, and RTP or SRTP for
incoming calls.
• 2: Use RTP or SRTP for both outgoing and incoming calls.
This value is valid only when the unit is connected to a
Panasonic PBX. "SRTP_MIX_TRANSFER_ENABLE_n" must
also be set to "Y".
Default Value 1
Web User Interface Reference SRTP Mode
SRTP_MIX_CONFERENCE_ENABLE_n
Parameter Name Example SRTP_MIX_CONFERENCE_ENABLE_1,
SRTP_MIX_CONFERENCE_ENABLE_2, …,
SRTP_MIX_CONFERENCE_ENABLE_16
Value Format BOOLEAN
Description Specifies whether to allow conferences where each participant can
use either SRTP or RTP.
Value Range
• Y: Enable
• N: Disable
Default Value
N
Web User Interface Reference Enable Mixed SRTP & RTP by Conference
SRTP_MIX_TRANSFER_ENABLE_n
Parameter Name Example SRTP_MIX_TRANSFER_ENABLE_1,
SRTP_MIX_TRANSFER_ENABLE_2, …,
SRTP_MIX_TRANSFER_ENABLE_16
Value Format BOOLEAN
Description Specifies whether to allow call transfers between a user who is using
SRTP and a user who is using RTP.
Value Range
• Y: Enable
• N: Disable
Default Value
N
Web User Interface Reference Enable Mixed SRTP & RTP by Transfer
SRTP_HELD_CALL_RTP_ENABLE
Value Format BOOLEAN
5.3.27 SRTP Settings
260 Administrator Guide Document Version 2016-05