Panasonic KX-HDV430 - Page 275

Value Range
• 0: No Repeat
• 1: Repeat
Default Value 0
OUTSIDE_DIAL_TONE_TIMING
Value Format Comma-separated Integer
Description Specifies the pattern, in milliseconds, of Second Dial Tone using Max.
10 whole numbers (off 1, on 1, off 2, on 2…) separated by commas.
Value Range 0–16000 (msec) (0=Continuous)
Default Value 60,0
CONFIRMATION_TONE5_FRQ
Value Format Comma-separated Integer
Description Specifies the confirmation tone 5 frequencies, in hertz, of
confirmation tone 5 using Max. 2 whole numbers separated by a
comma.
Value Range 200–2000 Hz (0: no tone)
Default Value 1000
CONFIRMATION_TONE5_GAIN
Value Format INTEGER
Description Specifies the gain, in decibels, of confirmation tone 5.
Value Range -24–24 (dB)
Default Value 0
REORDER_TONE_ENABLE
Value Format BOOLEAN
Description Specifies whether to enable reorder tone.
Value Range
• Y: Enable
• N: Disable
Default Value
Y
TONE_LEN_DISCONNECT
Value Format INTEGER
Description Specifies the duration, in seconds, that a disconnect tone will be
heard when the other party ends a call and the unit is being used.
Value Range 1–15 (s)
Default Value 3
5.3.33 Tone Settings
Document Version 2016-05 Administrator Guide 275