Panasonic KX-HDV430 - Page 283

Description Specifies the cadence, in milliseconds, of pattern ID 3, described in
the LSSGR, GR-506-CORE, "Signaling for Analog Interfaces" section
14, using up to 8 whole numbers (on 1, off 1, on 2, off 2…) separated
by commas.
Value Range 0–5000 (0: Continuous)
Note
• Avoid setting 1–50 for any of the values.
Default Value 400,200,400,200,800,4000
BELL_CORE_PATTERN4_TIMING
Value Format Comma-separated Integer
Description Specifies the cadence, in milliseconds, of pattern ID 4, described in
the LSSGR, GR-506-CORE, "Signaling for Analog Interfaces" section
14, using up to 8 whole numbers (on 1, off 1, on 2, off 2…) separated
by commas.
Value Range 0–5000 (0: Continuous)
Note
• Avoid setting 1–50 for any of the values.
Default Value 300,200,1000,200,300,4000
BELL_CORE_PATTERN5_TIMING
Value Format Comma-separated Integer
Description Specifies the cadence, in milliseconds, of pattern ID 5, described in
the LSSGR, GR-506-CORE, "Signaling for Analog Interfaces" section
14, using up to 8 whole numbers (on 1, off 1, on 2, off 2…) separated
by commas.
Value Range 0–5000 (0: Continuous)
Note
• Avoid setting 1–50 for any of the values.
Default Value 500
KEY_PAD_TONE
Value Format INTEGER
Description Specifies whether a tone is heard in response to key presses.
Value Range
• 0: Off
• 1: On
Default Value 1
5.3.33 Tone Settings
Document Version 2016-05 Administrator Guide 283