Button Usage
Flexible CO
Used to access a CO line or trunk group when making or receiving
a call according to the button’s preprogrammed CO Line Access
method (Default: S-CO). Can also be customized as a different
feature button.
INTERCOM
Used to make or receive intercom calls.
AUTO ANS (Auto Answer)/MUTE
Used to receive an incoming call in hands-free mode, or used to
mute the built-in microphone or handset during a conversation.
VOICE CALL/MUTE
Used to monitor an intercom call automatically (a hands-free
conversation
is
not
possible).
Also used to mute the handset during
a conversation.
AUTO DIAL/STORE
Used for System/Personal Speed Dialing and storing program
changes.
CONF (Conference)
Used to establish a multiparty conversation.
FWD/DND
Used to set Call Forwarding (FWD) or Do Not Disturb (DND).
PAUSE
Used to insert a dialing pause in a stored number. Also used as the
Program
button on analog
proprietary telephones (APTs) which do
not have the PROGRAM button.
Soft
Used to select the item displayed on the bottom line of the display.
SELECT
Used to select the displayed item or to call the displayed number.
SHIFT Used to access the second level of Soft button items.
MODE Used to change the current display to access various features.
NEXT PAGE Used to switch the page for the Self Labeling feature (KX-NT366/
KX-NT560).
[DSS Console]
Button Usage
ANSWER
Used to answer an incoming call, or place the current call on hold and
answer another call with a one-touch operation.
RELEASE
Used to disconnect the line during or after a conversation, or to
complete a Call Transfer.
Flexible CO
Used to access a CO line or trunk group when making or receiving a
call
according to the
button’s preprogrammed CO Line Access method.
Can also be customized as a different feature button.
Flexible DSS (Direct Station
Selection)
Used to call an extension with a one-touch operation. Each button is
programmed
to
correspond
to
an extension. DSS buttons can also be
customized as other different feature buttons.
PF (Programmable Feature)
Used to access a preprogrammed feature with a one-touch operation.
(no default)
Document Version 2013-05 Feature Manual 115
6.1.1 Fixed Buttons
To Next Page
Loading...
