Conditions
• Hardware Requirement: A user-supplied door opener installed on each door.
• A door opener can unlock a door even if no doorphone is installed.
• Door Open Duration
An opened door will remain unlocked for a preprogrammed length of time.
Installation Manual References
KX-NCP500/KX-NCP1000
3.9.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays
KX-TDE100/KX-TDE200
3.9.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays
KX-TDE600
3.11.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays
PC Programming Manual References
4.5 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf—
Doorphone—Open Duration
4.9 [2-6-1] Numbering Plan—Main—Features— Door Open
4.12 [2-7-1] Class of Service—COS Settings—Optional Device & Other Extensions— Door Unlock
PT Programming Manual References
[207] Door Unlock Time
[512] Permission for Door Open Access
Feature Manual References
3.1.23 COS (Class of Service)
Operating Manual References
1.3.21 Door Open
4.1.12 Doorphone Call
Description
A visitor can use a doorphone to call its preprogrammed destination. Extension users can call a doorphone.
Conditions
• Hardware Requirement:
An optional doorphone, the OPB card and DPH card
• Call Destination
The destination of
doorphone calls can be assigned to each doorphone port for each time mode. The Time
Table is determined by the tenant number assigned to each doorphone port. (® 17.1.5 Time Service)
The following destinations cannot be the destination for doorphone calls:
– Floating Extension no. for SVM
98 Feature Manual Document Version 2013-05
4.1.12 Doorphone Call
To Next Page
Loading...
