[Example]
Extension User
Group 1
Call Pickup Group 1
Extn. 100 Extn. 101
Extension User
Group 2
Extn. 102 Extn. 103
Extension User
Group 3
Extn. 104 Extn. 105
Call Pickup Group 2 Call Pickup Group 3
Extension User
Group 4
Extn. 106 Extn. 107
[Caller Information Display before Call Pickup]
• This feature is only available under the following conditions:
– The "Caller Information Display before Call Pick
-up" setting is enabled.
– Directed Call Pickup is enabled for the extension picking up the call.
– The assigned button is a DSS button and not an NDSS button.
PC Programming Manual References
4.9 [2-6-1] Numbering Plan—Main—Features
→
Group Call Pickup
→ Directed Call Pickup
→ Call Pickup Deny Set / Cancel
4.12 [2-7-1] Class of Service—COS Settings—Assistant— Call Pickup by DSS
4.18 [2-9] System Options—Option 4
→ DSS Key—DSS key mode for Incoming Call
→ DSS Key—Call Pick-up by DSS key for Direct Incoming Call
→ DSS Key—Call Pick-up by DSS key for ICD Group Call
→ DSS Key—Caller Information Display before Call Pick-up
5.7 [3-3] Call Pickup Group
6.1 [4-1-1] Wired Extension—Extension Settings—Option 3— Call Pickup Deny
6.10 [4-2-1] Portable Station—Extension Settings—Option 3— Call Pickup Deny
PT Programming Manual References
[650] Extension User Groups of a Pickup Group
Feature Manual References
3.1.23 COS (Class of Service)
21.1 Capacity of System Resources
Operating Manual References
1.3.9 Call Pickup
50 Feature Manual Document Version 2013-05
3.1.9 Call Pickup
To Next Page
Loading...
