Panasonic KX-NCP500 - 1.4 During a Conversation

Conditions
• If Automatic Caller ID Modification is used:
Store the modified number in the System Speed Dialing Table.
PC Programming Manual References
8.1 [6-1] System Speed Dial
→ Name
→ CO Line Access Number + Telephone Number
→ CLI Destination
12.2 [10-2] DIL Table & Port Settings—DIL— CLI Ring for DIL—Day, Lunch, Break, Night
12.3 [10-3] DID Table— CLI Ring for DID—Day, Lunch, Break, Night
PT Programming Manual References
[001] System Speed Dialing Number
[002] System Speed Dialing Name
Feature Manual References
3.1.3 Caller ID
4.1.6 DID (Direct Inward Dialing)
4.1.7 DIL (Direct In Line)
9.1.10 INCOMING CALL FEATURES
16.1.8 Speed Dialing, System
3.1.16 CLIP (Calling Line Identification Presentation)
Description
Calling Line Identification Presentation (CLIP):
The PBX can
send a preprogrammed telephone number to the network when an extension user makes a call.
The called party can see the number on his telephone display before answering the call.
Connected Line Identification Presentation (COLP):
The PBX sends a preprogrammed telephone number to the network when the extension user answers an
incoming call. The caller can see the number of the answering party on his telephone display when the call is
answered.
[CLIP Example]
ISDN
1) Dials
"87654321".
Called party
CLIP No.: 87654321
Caller
CLIP No.: 12345678
2) "12345678"
is displayed.
PBX
Document Version 2013-05 Feature Manual 59
3.1.16 CLIP (Calling Line Identification Presentation)