Panasonic KX-NCP500 - CO Line Call Limitation

PC Programming Manual References
3.24 [1-1] Slot—Port Property - Extension Port—
Connection
3.30 [1-1] Slot—Port Property - LCO Port— Connection
3.33 [1-1] Slot—Port Property - PRI Port— Connection
3.36 [1-1] Slot—Port Property - T1 Port— Connection
3.39 [1-1] Slot—Port Property - IP-GW Port (KX-TDE series only)— Connection
3.43 [1-1] Slot—Port Property - IP-Extension Port (KX-TDE series only)— Connection
4.9 [2-6-1] Numbering Plan—Main—Features
→ Idle Line Access (Local Access)
→ Trunk Group Access
→ Single CO Line Access
4.13 [2-7-2] Class of Service—External Call Block
5.1 [3-1-1] Trunk Group—TRG Settings—Main— Line Hunting Order
5.2 [3-1-2] Trunk Group—Local Access Priority
6.5 [4-1-4] Wired Extension—Flexible Button
→ Type
→ Parameter Selection (for Single CO)
→ Parameter Selection (for Group CO)
6.13 [4-2-3] Portable Station—Flexible Button
→ Type
→ Parameter Selection (for Single CO)
→ Parameter Selection (for Group CO)
6.18 [4-3] DSS Console
→ Type
→ Parameter Selection (for Single CO)
→ Parameter Selection (for Group CO)
10.1 [8-1] System Setting— ARS Mode
12.1 [10-1] CO Line Settings— CO Name
PT Programming Manual References
[400] LCOT CO Line Connection
[401] LCOT CO Line Name
[409] LCOT CO Line Number Reference
[500] Trunk Group Number
Feature Manual References
3.1.23 COS (Class of Service)
6.1.3 Flexible Buttons
Operating Manual References
1.2.1 Making Calls
3.1.18 CO Line Call Limitation
Description
CO line calls are limited by the following features:
Document Version 2013-05 Feature Manual 63
3.1.18 CO Line Call Limitation