Panasonic KX-NCP500 Feature Manual

18.1 U
18.1.1 Upgrading the Software
Description
It is possible to upload software from a PC to the PBX to upgrade the following:
Data File Storing Area
Main Processing (MPR) software data Operating system data area on MPR card.
Default system programming data for each
country/area
Country/area data area on the MPR card.
Language data for PT display Each language data area on the MPR card.
There are two types:
Type
1: Proprietary
Telephone (PT) display except for PT
system programming (® 13.1.32 PT Programming) (five
languages max.)
Type 2: PT system programming data (one language
max.)
LPR (software
on a slot
card) software data Flash ROM on the appropriate optional services card (e.g.,
DHLC, DLC, T1, PRI, etc.)
Cell Station (CS) software data Flash ROM on the CS
Conditions
• The software version of the MPR card can be confirmed through system programming.
Installation Manual References
KX-NCP500/KX-NCP1000
3.3.1 IPCMPR Card
KX-TDE100/KX-TDE200
3.3.1 IPCMPR Card
KX-TDE600
3.3.1 IPCEMPR Card
PC Programming Manual References
3.2 [1-1] Slot—Summary
PT Programming Manual References
[190] Main Processing (MPR) Software Version Reference
356 Feature Manual Document Version 2013-05
18.1.1 Upgrading the Software

Panasonic KX-NCP500 Specifications

General

VoIP Support	Yes
Operating System	Proprietary
Type	Hybrid IP-PBX
VoIP Codecs	G.711, G.729A
Protocols	SIP, H.323
Operating Temperature	0°C to 40°C
Analog Extensions	Yes
IP Extensions	Yes
Power Supply	AC 100-240 V, 50/60 Hz
SIP Trunks	Yes
Wireless (DECT) Extensions	Yes, with optional module
Weight	4.0 kg
Humidity	20% to 80% (non-condensing)