Installation Manual References
KX-NCP500/KX-NCP1000
3.12 Power Failure Connections
KX-TDE100/KX-TDE200
3.6.7 SLC16 Card (KX-TDA0174), MSLC16 Card
(KX-TDA0175), and CSLC16 Card (KX-TDA0177)
3.6.8 MCSLC16 Card (KX-TDA1176) and MCSLC24 Card (KX-TDA1178)
3.12.1 Power Failure Connections
KX-TDE600
3.8.7
CSLC16 Card (KX-TDA0177), ESLC16 Card (KX-TDA6174), EMSLC16 Card (KX-TDA6175), ECSLC24
Card (KX-TDA6178), and EMSLC24 Card (KX-TDA6179)
3.14.1 Power Failure Connections
PC Programming Manual References
13.3 [11-3] Power Failure Transfer
13.1.12 Predialing
Description
A display proprietary telephone (PT) user can check and correct the number to be dialed on-hook. The call will
be initiated after going off-hook.
Conditions
• Storing the Predialed Number in Personal Speed Dialing
The predialed number can be stored in Personal Speed Dialing by pressing the AUTO DIAL/STORE button
(® 16.1.7 Speed Dialing, Personal). In this case, the extension will enter personal programming mode
automatically so that a name can be assigned to the stored number.
Operating Manual References
3.1.2 Personal Programming
13.1.13 Printing Message
Description
An extension user can select a message to be output on SMDR. Up to eight messages can be preprogrammed
in the Printing Message table, and are available to all extensions connected to the PBX. A message can contain
the "%" symbol, which requires a number to be entered in its place when the message is selected at an
extension.
Depending on the content of the preprogrammed messages, this feature can be used to record a variety of
information, which can be output on SMDR to, for example, a connected PC.
[Example]
If message 1 is preprogrammed as "Started work", and message 2 as "Finished work", employees can sign in
by selecting message 1 when starting work, and sign out by selecting message 2 when finishing. A connected
PC can then be used to generate employee work records.
Document Version 2013-05 Feature Manual 233
13.1.13 Printing Message
To Next Page
Loading...
