"0" to be dialed first) are treated as extensions of the telephone company and do not get recorded on
SMDR, because in this
case this PBX recognizes the telephone company as the host PBX. Therefore, only
long distance calls are recorded on SMDR.
PC Programming Manual References
5.1 [3-1-1] Trunk Group—TRG Settings—Host PBX Access Code
13.1 [11-1] Main—SMDR Options—
Option—ARS Dial
PT Programming Manual References
[471] Host PBX Access Code
Feature Manual References
16.1.4 SMDR (Station Message Detail Recording)
21.1 Capacity of System Resources
8.1.6 Hot Line
Description
An extension user can make an outgoing call by simply going off-hook, if the user has previously stored the
telephone number or the extension number.
If the Hot
Line feature is set and the user goes off-hook, a dial tone is generated for a specified time assigned
through system programming and then dialing starts. During this waiting time the user can dial another party,
overriding the Hot Line feature.
This feature is also known as Pickup Dialing.
Conditions
• Compatible Telephone
Proprietary telephone (PT), single line telephone (SLT), T1-OPX, and portable station (PS)
PC Programming Manual References
4.5 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—
Dial—Hot Line (Pickup Dial) Start
4.9 [2-6-1] Numbering Plan—Main—Features— Hot Line (Pickup Dial) Program Set / Cancel
6.1 [4-1-1] Wired Extension—Extension Settings—Option 2
→ Pickup Dial Set
→ Pickup Dial No.
6.10 [4-2-1] Portable Station—Extension Settings—Option 2
→ Pickup Dial Set
→ Pickup Dial No.
PT Programming Manual References
[204] Hot Line Waiting Time
Document Version 2013-05 Feature Manual 147
8.1.6 Hot Line
To Next Page
Loading...
