Panasonic KX-NCP500 - Page 128

Depending on the type of incoming intercom or CO line calls, it is possible to set a different destination for
each.
Incoming
Intercom Calls
Incoming CO
Line Calls
Available Forwarding Type:
Forwards to
Another Extension
Forwards to
Outside Party
Extension
Forwards to
Another Extension
Forwards to
Outside Party
Available Forwarding Type: All Calls
ICD Group
All Calls
Busy
No Answer
Busy/No Answer
Incoming
Intercom Calls
Incoming CO
Line Calls
[Available Destinations]
Destination Availability
Condition for Original Extension/
Incoming Call Distribution Group
Wired Extension (PT/SLT/SIP Extension/
T1-OPX)
ü
Only available when FWD to
extension is allowed through COS
programming.
*1
PS
ü
ICD Group
ü
PS Ring Group
ü
–
Floating Extension no. for SVM
ü
–
VM Group (DTMF/DPT)
ü
–
External Pager (TAFAS)
ü
–
DISA
ü
Only available for incoming CO line
calls. Incoming intercom and
doorphone calls cannot be
forwarded to a DISA floating
extension number.
Analog/ISDN Remote Maintenance
ü
–
Idle Line Access no. + Phone no.
ü
Only available when FWD to CO line
is allowed through COS
programming.
Trunk Group Access no. + Trunk Group no. +
Phone no.
ü
128 Feature Manual Document Version 2013-05
6.1.6 FWD (Call Forwarding)