EasyManua.ls Logo

Panasonic KX-NCP500 - Page 245

Panasonic KX-NCP500
422 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. Extension 1012 of PBX-1 dials the TIE line access number "7", PBX code "952", verification code entry
feature number, < , verification code, verification code personal identification number (PIN), Idle Line
Access number of PBX-2 "9", and the telephone number "211-4567".
2. If the specified verification code applies COS 2 of PBX-2, the call is connected to the outside party
through PBX-2, because COS 2 is not blocked from accessing TRG 3 of PBX-2.
c. Override using an Itemized Billing Code for ARS
By assigning an Itemized Billing Code for ARS to PBX-1, an extension's verification code can be sent to
PBX-2 automatically, without the extension having to dial the verification code.
® 6.1 [4-1-1] Wired Extension—Extension Settings—Option 1— ARS Itemized Code/2nd CLIP (10
digits)
® 6.10 [4-2-1] Portable Station—Extension Settings—Option 1— ARS Itemized Code/2nd CLIP (10
digits)
® 10.6 [8-5] Carrier
Note
If using an IP-GW card, and the number dialed after ARS modification is over 20 digits, the software
of the IP-GW card must be upgraded to its latest version to use this feature.
Document Version 2013-05 Feature Manual 245
13.1.15 PRIVATE NETWORK FEATURES

Table of Contents

Other manuals for Panasonic KX-NCP500

Related product manuals